Product Information
Operation:
The load is conveyed to the required strapping position. The automatic strapping process is started. The strap is guided round in the strap guide and stretched round the load at an optimised tension, then sealed and cut off. The procedure is repeated for each load, depending on the number of strapping cycles. The strapping head is located on top of the package.

AF/AP 111 MVB
Only the strapping head is lowered to the package height. The difference in height between the highest and the lowest load can be a maximum of 550 mm.

AF/AP 111 MKB
Not just the strapping head lowers onto the pallet load but the entire upper strap guide frame. Strapping can be performed even if pallet height is only 300 mm or less.


Main advantages:

• Compact, minimal space required
• Easy access to all mechanical components,
to facilitate service and maintenance
• Fast and economical to manufacture so low cost
• High strap tension, up to 7 KN
• Modular adaptation to type and size of package
• Strapping head service-friendly
• Easy to integrate into existing conveyor lines. Adjustable in height
• Minimal space required.
• Fully electric, 3-ph. + N or electric/hydraulic
• All the machine functions are electronically program controlled, with plain text display
• The modules are manufactured in series, each to the same specifications and with the
same precision
• The results are high reliability and minimal servicing

Technical dataAF/AP 111 MVB :
Load width:	500 to 2.200 mm
Load height:	300 to 2.200 mm
Conveyor height:	Adaptable from 110 to 1000 mm
Strap guide frame:	Pitches 300 or 500 mm when assembled
Strapping head traversing capability:	700 mm max.

Technical data AF/AP 111 MKB :
Load width:	500 to 2.500 mm
Load height:	300 to 2.500 mm
Conveyor height:	Adaptable from 110 to 1000 mm
Strap guide frame:	Variable with flaps

• Tell a Colleague